Packet Information Pre-Extraction Commands; Qos Pre-Classify - HP HSR6800 Command Reference Manual
Acl and qos
Hide thumbs
Also See for HSR6800:
- Configuration manual (478 pages) ,
- Installation manual (146 pages) ,
- Troubleshooting manual (41 pages)
Table of Contents
Advertisement
[Sysname-Serial2/0/1] shutdown
[Sysname-Serial2/0/1] undo shutdown
Packet information pre-extraction commands
qos pre-classify
Use qos pre-classify to enable packet information pre-extraction on an interface.
Use undo qos pre-classify to disable packet information pre-extraction on an interface.
Syntax
qos pre-classify
undo qos pre-classify
Default
Packet information pre-extraction is disabled.
Views
Tunnel interface view, RPR logical interface view, Layer 3 aggregate interface view, HDLC link bundle
interface view
Default command level
2: System level
Examples
# Enable packet information pre-extraction on tunnel interface Tunnel 1.
<Sysname> system-view
[Sysname] interface tunnel 1
[Sysname-Tunnel1] qos pre-classify
113
Advertisement
Table of Contents
