Policy Enable; Qos Pre-Classify - HP HSR6600 Command Reference Manual

policy enable

Use policy enable to enable the IPsec policy.
Use undo policy enable to disable the IPsec policy.
Syntax
policy enable
undo policy enable
Default
The IPsec policy is enabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
Usage guidelines
The command is not applicable to manual IPsec policies.
If the IPsec policy is not enabled for the IKE peer, the peer cannot take part in the IKE negotiation.
Examples
# Enable the IPsec policy with the name policy1 and sequence number 100.
<Sysname> system-view
[Sysname] ipsec policy policy1 100 isakmp
[Sysname-ipsec-policy-isakmp-policy1-100] policy enable
Related commands
ipsec policy (system view)
•
ipsec policy-template
•

qos pre-classify

Use qos pre-classify to enable packet information pre-extraction.
Use undo qos pre-classify to restore the default.
Syntax
qos pre-classify
undo qos pre-classify
Default
Packet information pre-extraction is disabled.
Views
IPsec policy view, IPsec policy template view
Default command level
2: System level
306