Cwmp Acs Default Url - HPE FlexFabric 5930 Series Network Management And Monitoring Command Reference

Usage guidelines
You can configure only one password for authentication to the default ACS URL. If you use the
command multiple times, the password configured most recently takes effect.
For a successful connection, make sure the CPE has the same password setting as the ACS.
You do not need to configure this command if the default ACS URL does not require a password for
authentication.
Examples
# Configure the password used for authentication to the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default password simple newpsw
Related commands
•

cwmp acs default url

•
cwmp acs default username
cwmp acs default url
Use cwmp acs default url to specify a default ACS URL.
Use undo cwmp acs default url to restore the default.
Syntax
cwmp acs default url url
undo cwmp acs default url
Default
No default ACS URL is specified.
Views
CWMP view
Predefined user roles
network-admin
Parameters
url: Specifies the default ACS URL, a string of 8 to 255 characters. The URL must use the
http://host[:port]/path or https://host[:port]/path format.
Usage guidelines
The CPE attempts to connect to the default ACS URL if no ACS URL has been assigned to it through
the cwmp acs url command or DHCP.
You can configure only one default ACS URL. If you use the command multiple times, the final URL
configuration takes effect.
Examples
# Specify the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default url http://www.acs.com:80/acs
327