Configuring The Default Acs Attributes From The Cli - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

The following example configures the ACS address as http://169.254.76.31:7547/acs, username as
1234, and password as 5678:
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] option 43 hex
0127687474703A2F2F3136392E3235342E37362E33313A373534372F61637320313233342035363738
Table 24 Hexadecimal forms of the ACS attributes
Attribute
Length
ACS URL
ACS connect
username
ACS connect
password
For more information about DHCP and DHCP Option 43, see layer 3—IP Services Configuration
Guide.
Configuring the preferred ACS attributes from the CLI
Step
1. Enter system view.
2. Enter CWMP view.
3. Configure the preferred ACS
URL.
4. Configure the username for
authentication
preferred ACS URL.
5. (Optional.)
password for authentication
to the preferred ACS URL.

Configuring the default ACS attributes from the CLI

Step
1. Enter system view.
2. Enter CWMP view.
3. Configure the default ACS
URL.
4. Configure the username for
authentication to the default
ACS URL.
Attribute value
39 characters
http://169.254.76.31/acs
1234
5678
Command
system-view
cwmp
cwmp acs url url
to the
cwmp acs username username
Configure the
cwmp acs password { cipher |
simple } password
Command
system-view
cwmp
cwmp acs default url url
cwmp acs default username
username
Hexadecimal form
27
687474703A2F2F3136392E3235342E37362E33313A37353
4372F61637320
NOTE:
The two ending digits (20) represent the space.
3132333420
NOTE:
The two ending digits (20) represent the space.
35363738
209
Remarks
N/A
N/A
By default, no preferred ACS URL
has been configured.
By default, no username has
been configured
authentication to the preferred
ACS URL.
By default, no password has been
configured for authentication to
the preferred ACS URL.
Remarks
N/A
N/A
By default, no default ACS URL
has been configured.
By default, no username has been
configured for authentication to
the default ACS URL.
for