Reset Qos Statistics L2Vpn-Pw; Fifo Queuing Commands; Display Qos Queue Fifo - HPE FlexNetwork HSR6800 series Command Reference Manual

Field
Active
Max active
Total

reset qos statistics l2vpn-pw

Use reset qos statistics l2vpn-pw to clear the QoS statistics for PWs.
Syntax
reset qos statistics l2vpn-pw [ peer ip-address pw-id pw-id ]
Views
User view
Predefined user roles
network-admin
Parameters
peer ip-address pw-id pw-id: Specifies a PW by its peer PE LSR ID and its PW ID. The ip-address
argument represents the LSR ID of the peer PE of the PW. The value range for the pw-id argument is
1 to 4294967295. If you do not specify a PW, this command clears QoS statistics for all PWs.
Examples
# Clear the QoS statistics for PW 1 with peer PE IP address 1.1.1.1.
<Sysname> reset qos statistics l2vpn-pw peer 1.1.1.1 pw-id 1

FIFO queuing commands

display qos queue fifo

Use display qos queue fifo to display the FIFO information for interfaces or PWs.
Syntax
display qos queue fifo { interface [ interface-type interface-number ] | l2vpn-pw [ peer ip-address
pw-id pw-id ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the FIFO information for all interfaces.
peer ip-address pw-id pw-id: Specifies a PW by its peer PE LSR ID and its PW ID. The ip-address
argument represents the LSR ID of the peer PE of the PW. The value range for the pw-id argument is
1 to 4294967295. If you do not specify a PW, this command displays the FIFO information for all
PWs.
Description
Number of active WFQ queues.
Maximum number of active WFQ queues that was reached.
Total number of configured WFQ queues.
86