Configuring the device as an IPv6 TFTP client
Step
1.
Enter system view.
2.
(Optional.) Use an ACL to
control the client's access
to TFTP servers.
3.
Specify the source IPv6
address for TFTP packets
sent by the TFTP client.
4.
Return to user view.
5.
Download or upload a file in
an IPv6 network.
Command
system-view
tftp-server ipv6 acl acl-number
tftp
client
ipv6
{
interface
interface-type
interface-number
|
source-ip-address }
quit
tftp
ipv6
tftp-server
interface-type
interface-number ] { get | put |
sget
}
source-filename
[
destination-filename
[
vpn-instance
vpn-instance-name ] [ dscp
dscp-value | source { interface
interface-type interface-number
| ipv6 source-ipv6-address } ] *
80
Remarks
N/A
By default, no ACL is used for access
control.
source
By default, no source IPv6 address is
specified. The source address is
ipv6
automatically selected as defined in
RFC 3484.
N/A
[
-i
The source IP address specified in
this command takes precedence
]
over the one set by the tftp client
ipv6 source command.
Use this command in user view.