Wlan Qos Commands; Bandwidth-Guarantee; Bandwidth-Guarantee Service-Template - HPE FlexNetwork MSR Series Command Reference Manual

WLAN QoS commands

WLAN is supported only on the MSR954(JH297A/JH298A/JH299A).
The term "AP" in this document refers to MSR routers that support WLAN.

bandwidth-guarantee

Use bandwidth-guarantee enable to enable bandwidth guaranteeing.
Use bandwidth-guarantee disable to disable bandwidth guaranteeing.
Use undo bandwidth-guarantee to restore the default.
Syntax
bandwidth-guarantee { disable | enable }
undo bandwidth-guarantee
Default
Bandwidth guaranteeing is disabled.
Views
Radio interface view
Predefined user roles
network-admin
Usage guidelines
This command enables clients that are associated with the same radio to get the guaranteed
bandwidth when the network is congested. To set the guaranteed bandwidth, use the
bandwidth-guarantee service-template command.
Examples
# Enable bandwidth guaranteeing.
<Sysname> system-view
[Sysname] interface wlan-radio 0/1
[Sysname-WLAN-Radio0/1] service-template 1
[Sysname-WLAN-Radio0/1] bandwidth-guarantee enable
Related commands

bandwidth-guarantee service-template

bandwidth-guarantee service-template
Use bandwidth-guarantee service-template to set a guaranteed bandwidth percentage for the
specified service template.
Use undo bandwidth-guarantee service-template to cancel the guaranteed bandwidth
percentage configuration for the specified service template.
Syntax
bandwidth-guarantee service-template service-template-name percent percent
undo bandwidth-guarantee { all | service-template service-template-name }
94