Entering System View From User View; Returning To The Upper-Level View From Any View; Returning To User View; Accessing The Cli Online Help - HPE FlexNetwork 5510 HI Series Fundamentals Configuration Manual

Enter interface view to configure interface parameters.

Enter VLAN view to add ports to the VLAN.

Enter user line view to configure login user attributes.

To display all commands available in a view, enter a question mark (?) at the view prompt.

Entering system view from user view

Task
Enter system view.

Returning to the upper-level view from any view

Task
Return to the upper-level view from any view.
Executing the quit command in user view terminates your connection to the device.
In public key view, use the peer-public-key end command to return to system view.

Returning to user view

To return directly to user view from any other view, use the return command or press Ctrl+Z.
Task
Return directly to user view.

Accessing the CLI online help

The CLI online help is context sensitive. Enter a question mark at any prompt or in any position of a
command to display all available options.
To access the CLI online help, use one of the following methods:
•
Enter a question mark at a view prompt to display the first keyword of every command available
in the view. For example:
<Sysname> ?
User view commands:
access-list
archive
backup
boot-loader
...
•
Enter a space and a question mark after a command keyword to display all available keywords
and arguments at the position.
If the question mark is in the place of a keyword, the CLI displays all possible keywords,

each with a brief description. For example:
<Sysname> terminal ?
debugging
Command
return
acl
Archive configuration
Backup the startup configuration file to a TFTP server
Software image file management
Enable to display debugging logs on the current terminal
2
Command
system-view
Command
quit