Qos Apply Policy (User Profile View); Qos Policy - HPE FlexNetwork HSR6800 series Command Reference Manual

<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos apply policy USER1 outbound
# Apply QoS policy 1 to the outgoing traffic of PW 1 with peer PE IP address 1.1.1.1.
<Sysname> system-view
[Sysname] xconnect-group a
[Sysname-xcg-a] connection a
[Sysname-xcg-a-a] peer 1.1.1.1 pw-id 1
[Sysname-xcg-a-a-1.1.1.1-1] qos apply policy 1 outbound

qos apply policy (user profile view)

Use qos apply policy global to apply a QoS policy to a user profile.
Use undo qos apply policy global to remove a QoS policy applied to a user profile.
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy policy-name { inbound | outbound }
Default
No QoS policy is applied to a user profile.
Views
User profile view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a QoS policy by its name, a case-sensitive string of 1 to 31 characters.
inbound: Applies the QoS policy to the incoming traffic of the device (traffic sent by online users).
outbound: Applies the QoS policy to the outgoing traffic of the device (traffic received by online
users).
Usage guidelines
Deleting a user profile also removes the QoS policies applied to the user profile.
Examples
# Apply QoS policy test to incoming traffic of user profile user.
<Sysname> system-view
[Sysname] user-profile user
[Sysname-user-profile-user] qos apply policy test outbound

qos policy

Use qos policy to create a QoS policy and enter its view, or enter the view of an existing QoS policy.
Use undo qos policy to delete a QoS policy.
Syntax
qos policy policy-name
undo qos policy policy-name
69