Omron NY532-5400 Troubleshooting Manual page 92

3 Error Descriptions and Corrections
Event code Event name
54010419 hex Incorrect Data
Type
5401041A hex Multi-execution of
Instructions
5401041B hex Data Capacity
Exceeded
5401041C hex Different Data
Sizes
5401041D hex Exceeded Simulta-
neous Instruction
Executed
Resources
54010C03 hex Full Reception Buf-
fer
54010C04 hex Multi-execution of
Ports
54010C05 hex Parity Error
54010C06 hex Framing Error
54010C07 hex Overrun Error
54010C08 hex CRC Mismatch
3-16
Meaning
A data type that cannot be • A data type that can-
used for an instruction is
specified for an input or in-
out variable.
Multi-execution was speci- • Execution of an
fied for an instruction that
does not support it.
Processing was not possi- • Data that exceeded
ble because the data that
was passed to the instruc-
tion was too large.
The size of the data speci- • Data of a size that is
fied for instruction input or
in-out data is different from
the size of the target
parameter.
The maximum resources • More than the maxi-
that you can use for the rel-
evant instruction group at
the same time was
exceeded.
The reception buffer is full. • The reception buffer is
The serial communications • An instruction was
instructions that cannot be
executed simultaneously
were executed.
A parity error occurred in • The communications
the data received.
• Noise
A framing error occurred in • The communications
the data received.
• Noise
An overrun error occurred • The next data was
in the data received.
The receive data had differ- • A wrong message was
ent CRC.
• Noise
Assumed cause
Maj Prt
not be used for an
instruction is specified
for an input or in-out
variable.
instruction that does
not support multi-exe-
cution of instructions
was specified more
than once.
the size that can be
processed was
passed to an instruc-
tion.
different from the size
of the target parame-
ter was specified for
the input or in-out data
of an instruction.
mum number of rele-
vant instructions were
executed at the same
time.
full.
executed while
another instruction
that cannot be exe-
cuted at the same time
with the former
instruction was exe-
cuted.
settings or baud rate
settings are not com-
patible with the remote
device.
settings or baud rate
settings are not com-
patible with the remote
device.
received during pro-
cessing of received
data because the
baud rate is too high.
received.
NY-series Troubleshooting Manual (W564)
Level
Refer-
ence
Min Obs Info
S page 3-115
S page 3-115
S page 3-116
S page 3-117
S page 3-118
S page 3-119
S page 3-120
S page 3-121
S page 3-122
S page 3-122
S page 3-123