1 Overview of Errors
1-3-5
Errors Related to the EtherNet/IP Function Module
This section describes the errors that are related to the EtherNet/IP Function Module.
Classifications
There are the following sources of errors in the EtherNet/IP Master Function Module.
Classification
Communications port 1 errors
Internal port 1 errors
CIP communications errors
TCP application errors
*1 Other Ethernet communications are not affected.
Note Refer to the NY-series Industrial Panel PC / Industrial Box PC Software User's Manual (Cat. No. W558) for
details on status variables.
1-28
If an error is detected for EtherNet/IP communications port 1, the correspond-
ing bit in the Communications Port 1 Error status variable shows the error.
If an error is detected for EtherNet/IP internal port 1, the corresponding bit in
the Internal Port 1 Error status variable shows the error.
If an error that is related to the tag data links or CIP message communications
is detected for EtherNet/IP communications port 1, the corresponding bit in the
CIP Error Communications Error status variable shows the error.
If an error that is related to the FTP server, NTP, or SMNP client is detected,
the corresponding bit in the TCP Application Communications Error status
variable shows the error.
Description
NY-series Troubleshooting Manual (W564)
*1