Omron NY532-5400 Troubleshooting Manual page 369

Number of Array Elements in Track Option Struc-
Event name
ture Variable Out of Range
The number of elements in an array in the structure variable that is specified in the TrackOptions in-out
Meaning
variable to a motion control instruction is out of range.
PLC Function Module
Source
Error attri-
Level
butes
Effects User program
System- Variable
defined
_MC_AX[*].Obsr.Active
variables
Assumed cause
The number of elements in an
Cause and
array of the structure variable that
correction
was specified for the in-out vari-
able of the instruction is out of
range.
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number
from the start of the section is given. For ST, the line number is given.
Attached
Attached Information 3: Name of the Instruction and Instruction Instance Where the Error Occurred. If
information
there is more than one possible instruction, information is given on all of them. Nothing is given if the
instruction cannot be identified.
Attached Information 4: Expansion Error Code (ErrorIDEx)
Precautions/ If a program is changed after an error occurs, the attached information that is displayed may not be cor-
Remarks rect.
NY-series Troubleshooting Manual (W564)
Source details
Observation
Recovery
Continues.
Operation
Data type
BOOL
Correction
Correct the number of elements
in the array in the structure vari-
able that is specified for the in-out
variable of the relevant instruction
so that it is in the valid range.
3 Error Descriptions and Corrections
5401572D hex
Event code
Instruction Detection
timing
---
Log category
The relevant instruction will end according to speci-
fications.
Name
Axis Observation Occurrence
Prevention
Make sure that the number of ele-
ments in the array in the structure
variable that is specified for the
in-out variable of the relevant
instruction is in the valid range.
At instruction
execution
System
3
3-293