Omron NY532-5400 Troubleshooting Manual page 84

3 Error Descriptions and Corrections
Event code Event name
60050000 hex Task Period
Exceeded
Errors Related to Controller Operation
Event code Event name
10200000 hex User Pro-
gram/Con-
troller
Configura-
tions and
Setup Trans-
fer Error
10210000 hex Illegal User
Program
Execution ID
10240000 hex Illegal User
Program
10250000 hex Illegal User
Pro-
gram/Con-
troller
Configura-
tions and
Setup
4011 0000 hex PLC Function
Processing
Error
3-8
Meaning Assumed cause
Task execution was • The task period setting is too
not completed short.
during the set task
• A user program is too large.
period for the pri-
• The number of times that pro-
mary periodic task
cessing is repeated is larger
or fixed periodic
than expected.
task.
• Task Priority Error for Periodic
Tasks and Event Tasks
• Frequent Event Task Execution
Meaning Assumed cause
The user program • The user program or Controller
or Controller Con- Configurations and Setup are
figurations and not correct because the power
Setup were not supply to the Controller was
transferred cor- interrupted during a download
rectly. of the user program or the Con-
troller Configurations and
Setup.
• The user program or Controller
Configurations and Setup are
not correct because the power
supply to the Controller was
interrupted during online edit-
ing.
• The user program or Controller
Configurations and Setup are
not correct because the power
supply to the Controller was
interrupted during a Clear All
Memory operation.
• The user program or Controller
Configurations and Setup are
not correct because the power
supply to the Controller was
interrupted during a restore
operation.
• Non-volatile memory failed.
The user program • The user program execution
execution IDs set in IDs set in the user program and
the user program in the CPU Unit do not match.
and in the CPU Unit
• A user program execution ID is
do not match.
set in the CPU Unit but not in
the user program.
The user program • There are more than 8 nesting
is not correct. levels for functions or function
blocks.
The upper limit of • The upper limit of the data size
the usable memory was exceeded.
was exceeded or
• The main memory capacity was
the user program or
exceeded.
Controller Configu-
• Non-volatile memory is deterio-
rations and Setup is
rating or has failed.
corrupted.
A fatal error was • An error occurred in the soft-
detected in the PLC ware.
Function Module.
Level
Maj Prt Min Obs Info
S page 3-66
Level
Maj Prt Min Obs Info
S page 3-67
S page 3-68
S page 3-69
S page 3-70
S page 3-71
NY-series Troubleshooting Manual (W564)
Reference
Reference