Omron NY532-5400 Troubleshooting Manual page 259

Event name Invalid Mode
Meaning The specified IO-Link master port is not the IO-Link mode.
PLC Function Module
Source
Error attri-
Level
butes
Effects User program
System- Variable
defined
None
variables
Assumed cause
Cause and
The specified IO-Link master port
correction
is not the IO-Link mode.
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number
from the start of the section is given. For ST, the line number is given.
Attached
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If
information
there is more than one possible instruction, information is given on all of them. Nothing is given if the
instruction cannot be identified.
Attached Information 4: Expansion Error Code (ErrorType)
Precautions/ If a program is changed after an error occurs, the attached information that is displayed may not be cor-
Remarks rect.
Event name I/O Power OFF Status
Meaning The I/O power is not supplied to the specified IO-Link master port.
PLC Function Module
Source
Error attri-
Level
butes
Effects User program
System- Variable
defined
None
variables
Assumed cause
The I/O power is not supplied to
Cause and
the specified IO-Link master port.
correction
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number
from the start of the section is given. For ST, the line number is given.
Attached
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If
information
there is more than one possible instruction, information is given on all of them. Nothing is given if the
instruction cannot be identified.
Attached Information 4: Expansion Error Code (ErrorType)
Precautions/ If a program is changed after an error occurs, the attached information that is displayed may not be cor-
Remarks rect.
NY-series Troubleshooting Manual (W564)
Source details
Observation
Recovery
Continues.
Operation
Data type
---
Correction
Set the specified IO-Link master
port to the IO-Link mode, and
execute the instruction again.
Source details
Observation
Recovery
Continues.
Operation
Data type
---
Correction
Supply the I/O power to the spec-
ified IO-Link master port, and
then execute the instruction.
3 Error Descriptions and Corrections
Event code 54014806 hex
Instruction Detection
timing
---
Log category
The relevant instruction will end according to speci-
fications.
Name
---
Prevention
Set the IO-Link master port to
specify to the IO-Link mode, and
execute the instruction.
Event code 54014807 hex
Instruction Detection
timing
---
Log category
The relevant instruction will end according to speci-
fications.
Name
---
Prevention
Make sure that an I/O power is
supplied to the specified IO-Link
master port before you execute
the instruction.
At instruction
execution
System
3
At instruction
execution
System
3-183