Omron NY532-5400 Troubleshooting Manual page 21

Manual name Cat. No.
NY-series W563
IPC Machine Controller
Industrial Panel PC /
Industrial Box PC
Built-in EtherNet/IP™
Port User's Manual
NJ/NY-series NC Inte- O030
grated Controller User's
Manual
NJ/NY-series O031
G code Instructions Ref-
erence Manual
NY-series Troubleshoot- W564
ing Manual
Sysmac Studio Version 1 W504
Operation Manual
CNC Operator O032
Operation Manual
NX-series EtherCAT® W519
Coupler Unit User's Man-
ual
NX-series NX Units W521
User's Manuals
W522
W523
W524
W540
W566
W565
W567
NX-series Data W525
Reference Manual
NX-series Safety Control Z930
Unit User's Manual
NX-series Safety Control Z931
Unit Instructions Refer-
ence Manual
NY-series Troubleshooting Manual (W564)
Model numbers Application
NY532- Using the built-in Ether-
Net/IP port in an NY-series
NY512-
Industrial PC.
NJ501-5300 Performing numerical con-
trol with NJ/NY-series Con-
NY532-5400
trollers.
NJ501-5300 Learning about the specifi-
cations of the G code/M
NY532-5400
code instructions.
NY532- Learning about the errors
that may be detected in an
NY512-
NY-series Industrial PC.
SYSMAC- Learning about the operat-
SE2 ing procedures and func-
tions of the Sysmac Studio.
SYSMAC Learning an introduction of
the CNC Operator and how
-RTNC0D
to use it.
NX-ECC Leaning how to use an NX-
series EtherCAT Coupler
Unit and EtherCAT Slave
Terminals
NX-ID Learning how to use NX
NX-IA Units
NX-OC
NX-OD
NX-AD
NX-DA
NX-TS
NX-PD1
NX-PF0
NX-PC0
NX-TBX
NX-EC0
NX-ECS
NX-PG0
NX-CIF
*1
NX-TS
NX-HB
NX-RS
NX-ILM
NX- Referring to the list of data
required for NX-series unit
system configuration.
NX-SL Learning how to use NX-
NX-SI series Safety Control Units
NX-SO
NX-SL Learning about the specifi-
cations of instructions for
the Safety CPU Unit.
Related Manuals
Description
Information on the built-in EtherNet/IP port is pro-
vided.
Information is provided on the basic setup, tag
data links, and other features.
Describes the functionality to perform the numeri-
cal control. Use this manual together with the
NJ/NY-series G code Instructions Reference Man-
ual (Cat. No. O031) when programming.
The G code/M code instructions are described.
Use this manual together with the NJ/NY-series
NC Integrated Controller User's Manual (Cat. No.
O030) when programming.
Concepts on managing errors that may be
detected in an NY-series Controller and informa-
tion on individual errors are described.
Describes the operating procedures of the Sysmac
Studio.
An introduction of the CNC Operator, installation
procedures, basic operations, connection opera-
tions, and operating procedures for main functions
are described.
The following items are described: the overall sys-
tem and configuration methods of an EtherCAT
Slave Terminal (which consists of an NX-series
EtherCAT Coupler Unit and NX Units), and infor-
mation on hardware, setup, and functions to set
up, control, and monitor NX Units through Ether-
CAT.
Describes the hardware, setup methods, and func-
tions of the NX Units.
Manuals are available for the following Units.
Digital I/O Units, Analog I/O Units, System Units,
Position Interface Units, Communications Interface
Units, Load Cell Input Units, and IO-Link Master
Units.
Provides the list of data required for system config-
uration including the power consumption and
weight of each NX-series unit.
Describes the hardware, setup methods, and func-
tions of the NX-series Safety Control Units.
Describes the instructions for the Safety CPU Unit.
When programming, use this manual together with
the NX-series Safety Control Unit User's Manual
(Cat. No. Z930).
19