Omron NY532-5400 Troubleshooting Manual page 247

External Restart Already Executed for Specified NX
Event name
Units
Meaning A restart was already in execution from the Sysmac Studio when the instruction was executed.
PLC Function Module
Source
Error attri-
Level
butes
Effects User program
System- Variable
defined
None
variables
Assumed cause
A restart was already in execution
Cause and
from the Sysmac Studio when the
correction
instruction was executed.
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number
from the start of the section is given. For ST, the line number is given.
Attached
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If
information
there is more than one possible instruction, information is given on all of them. Nothing is given if the
instruction cannot be identified.
Attached Information 4: Expansion Error Code (ErrorIDEx)
Precautions/ If a program is changed after an error occurs, the attached information that is displayed may not be cor-
Remarks rect.
Event name Unapplicable Unit Specified for Instruction
A slave that cannot be specified for the instruction was connected at the slave node address of the speci-
Meaning
fied Unit.
PLC Function Module
Source
Error attri-
Level
butes
Effects User program
System- Variable
defined
None
variables
Assumed cause
A slave that cannot be specified
Cause and
for the instruction was connected
correction
to the slave node address of the
specified Unit.
Attached Information 1: Error Location
Attached Information 2: Error Location Details (Rung Number). For a program section, the rung number
from the start of the section is given. For ST, the line number is given.
Attached
Attached Information 3: Names of the Instruction and Instruction Instance Where the Error Occurred. If
information
there is more than one possible instruction, information is given on all of them. Nothing is given if the
instruction cannot be identified.
Attached Information 4: Expansion Error Code (ErrorIDEx)
Precautions/ If a program is changed after an error occurs, the attached information that is displayed may not be cor-
Remarks rect.
NY-series Troubleshooting Manual (W564)
Source details
Observation
Recovery
Continues.
Operation
Data type
---
Correction
Restarting with an instruction is
not necessary if a restart was
already executed from the Sys-
mac Studio.
Source details
Observation
Recovery
Continues.
Operation
Data type
---
Correction
Connect the applicable Unit for
the instruction that is specified in
the network configuration infor-
mation.
3 Error Descriptions and Corrections
54012C06 hex
Event code
Instruction Detection
timing
---
Log category
The relevant instruction will end according to speci-
fications.
Name
---
Prevention
Do not execute restarts from the
Sysmac Studio during operation.
Event code 54012C07 hex
Instruction Detection
timing
---
Log category
The relevant instruction will end according to speci-
fications.
Name
---
Prevention
Do not connect a slave that can-
not be specified for the instruction
to the slave node address of the
specified Unit.
At instruction
execution
System
3
At instruction
execution
System
3-171