Hitachi H8/3664 Hardware Manual page 40

Table 2.2 Arithmetic Operation Instructions
Instruction Size*
ADD, SUB B/W/L
ADDX, SUBX B
INC, DEC B/W/L
ADDS, SUBS L
DAA, DAS B
MULXU B/W
MULXS B/W
DIVXU B/W
DIVXS B/W
CMP B/W/L
24
Function
Rd ± Rs → Rd, Rd ± #IMM → Rd
Performs addition or subtraction on data in two general registers, or
on immediate data and data in a general register. (Immediate byte
data cannot be subtracted from data in a general register. Use the
SUBX or ADD instruction.)
Rd ± Rs ± C → Rd, Rd ± #IMM ± C → Rd
Performs addition or subtraction with carry or borrow on data in two
general registers, or on immediate data and data in a general
register.
Rd ± 1 → Rd, Rd ± 2 → Rd
Increments or decrements a general register by 1 or 2. (Byte
operands can be incremented or decremented by 1 only.)
Rd ± 1 → Rd, Rd ± 2 → Rd, Rd ± 4 → Rd
Adds or subtracts the value 1, 2, or 4 to or from data in a 32-bit
register.
Rd decimal adjust → Rd
Decimal-adjusts an addition or subtraction result in a general register
by referring to CCR to produce 4-bit BCD data.
Rd × Rs → Rd
Performs unsigned multiplication on data in two general registers:
either 8 bits × 8 bits → 16 bits or 16 bits × 16 bits → 32 bits.
Rd × Rs → Rd
Performs signed multiplication on data in two general registers:
either 8 bits × 8 bits → 16 bits or 16 bits × 16 bits → 32 bits.
Rd ÷ Rs → Rd
Performs unsigned division on data in two general registers: either
16 bits ÷ 8 bits → 8-bit quotient and 8-bit remainder or 32 bits ÷ 16
bits → 16-bit quotient and 16-bit remainder.
Rd ÷ Rs → Rd
Performs signed division on data in two general registers: either 16
bits ÷ 8 bits → 8-bit quotient and 8-bit remainder, or 32 bits ÷ 16 bits
→ 16-bit quotient and 16-bit remainder.
Rd – Rs, Rd – #IMM
Compares data in a general register with data in another general
register or with immediate data, and sets CCR according to the
result.