Trap Receiver V1/V2 > Add - Advantech EKI-9516P-HV User Manual

Item
Timeout Value
Retries
Filter
UDP Port
Refresh
Add
Remove
To add a new SNMP trap receiver:
Click System > Advanced Configuration > SNMP > Trap Receiver v1/v2 > Add.
Figure 4.52 System > Advanced Configuration > SNMP > Trap Receiver v1/v2 >
The following table describes the items in the previous figure.
Item
Host IP Address
Community Name
Notify Type
SNMP Version
Retries
Timeout Value (Sec-
onds)
EKI-9500 Series User Manual
Description
The number of seconds to wait for an acknowledgment from the
SNMP management host before resending an inform message.
The number of times to resend an inform message that is not
acknowledged by the SNMP management host.
The name of the filter for the SNMP management host. The filter is
configured by using the CLI and defines which MIB objects to include
or exclude from the view. This field is optional.
The UDP port on the SNMP management host that will receive the
SNMP notifications. If no value is specified when configuring a
receiver, the default UDP port value is used.
Click Refresh to update the screen.
Click Add to add a new SNMP trap receiver.
Click Remove to remove the selected entries.
Add
Description
The IP address of the SNMP management host that will receive traps
generated by the device.
The name of the SNMP community that includes the SNMP manage-
ment host and the SNMP agent on the device.
The type of SNMP notification to send the SNMP management host:

Inform: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is acknowl-
edged by the SNMP management host. This type of notification
is not available for SNMPv1.

Trap: An SNMP message that notifies the host when a certain
event has occurred on the device. The message is not acknowl-
edged by the SNMP management host.
The version of SNMP to use, which is either SNMPv1 or SNMPv2.
The number of times to resend an inform message that is not
acknowledged by the SNMP management host.
The number of seconds to wait for an acknowledgment from the
SNMP management host before resending an inform message.
62