Table of Contents
Advertisement
Item
Description
Timeout Value (Sec-
The number of seconds to wait for an acknowledgment from the
onds)
SNMP receiver before resending an inform message.
Filter
The name of the filter for the SNMP management host. The filter is
configured by using the CLI and defines which MIB objects to include
or exclude from the view. This field is optional.
UDP Port
The UDP port on the SNMP management host that will receive the
SNMP notifications. If no value is specified when configuring a
receiver, the default UDP port value is used.
Submit
Click Submit to save the values.
Cancel
Click Cancel to close the window.
Supported MIBs
The SNMP Supported MIBs page lists the MIBs that the system currently supports.
To access this page, click System > Advanced Configuration > SNMP > Sup-
ported MIBs.
Figure 4.55 System > Advanced Configuration > SNMP > Supported MIBs
The following table describes the items in the previous figure.
Item
Description
Name
The RFC number, if applicable, followed by the defined name of the
MIB.
Description
The RFC title, or a brief description of the MIB.
Refresh
Click Refresh to update the screen.
Access Control Group
Use the SNMP Access Control Group page to configure SNMP access control
groups. These SNMP groups allow network managers to assign different levels of
authorization and access rights to specific device features and their attributes. The
SNMP group can be referenced by the SNMP community to provide security and
context for agents receiving requests and initiating traps as well as for management
systems and their tasks. An SNMP agent will not respond to a request from a man-
agement system outside of its configured group, but an agent can be a member of
multiple groups at the same time to allow communication with SNMP managers from
different groups. Several default SNMP groups are preconfigured on the system.
65
EKI-9500 Series User Manual
Advertisement
Table of Contents
