Table of Contents
Advertisement
To add a new VLAN:
Click Switching > VLAN > Status > Add.
The following table describes the items in the previous figure.
Item
VLAN ID or Range
Submit
Cancel
4.4.20.2
Port Configuration
Use the VLAN Port Configuration page to configure VLAN membership for the inter-
faces on the device and to specify whether traffic transmitted by the member ports
should be tagged. The device supports IEEE 802.1Q tagging. Ethernet frames on a
tagged VLAN have a 4-byte VLAN tag in the header.
To access this page, click Switching > VLAN > Port Configuration.
The following table describes the items in the previous figure.
Item
VLAN ID
Interface
Status
Figure 4.253 Switching > VLAN > Status > Add
Description
Specify VLAN ID(s). Use '-' to specify a range and ',' to separate VLAN
IDs or VLAN ranges in the list.
Click Submit to save the values.
Click Cancel to close the window.
Figure 4.254 Switching > VLAN > Port Configuration
Description
The menu includes the VLAN ID for all VLANs configured on the
device. Click the drop-down menu to select the correct VLAN to view
or configure settings for a VLAN
The interface associated with the rest of the data in the row. When
editing VLAN information for one or more interfaces, this field identifies
the interfaces that are being configured.
The current participation mode of the interface in the selected VLAN.
The value of the Status field differs from the value of the Participation
field only when the Participation mode is set to Auto Detect. The Status
is one of the following:
Include: The port is a member of the selected VLAN.
Exclude: The port is not a member of the selected VLAN.
229
EKI-9500 Series User Manual
Advertisement
Table of Contents
