Figure 4.95 System > Connectivity > Dhcp Client Options - Advantech EKI-9516P-HV User Manual

4.3.5.7 DHCP Client Options
Use the DHCP Client Options page to configure DHCP client settings on the system.
To access this page, click System > Connectivity > DHCP Client Options.
Figure 4.95 System > Connectivity > DHCP Client Options
The following table describes the items in the previous figure.
Item
DHCP Vendor Class
ID Mode
DHCP Vendor Class
ID String
Submit
Refresh
Cancel
4.3.6 Firmware
4.3.6.1 Status
Use the Dual Image Status page to view information about the software images on
the device. The device can store up to two software images in permanent storage.
The dual image feature allows you to upgrade the device without deleting the older
software image.
To access this page, click System > Firmware > Status.
The following table describes the items in the previous figure.
Item
Unit
Active
Backup
Current Active
Next Active
Image Description
Active
Backup
Refresh
4.3.6.2 Configuration and Upgrade
Use the Dual Image Configuration and Upgrade page to transfer a new firmware
(code) image to the device, select which image to load during the next boot cycle,
EKI-9500 Series User Manual
Description
The VCI administrative mode. When the mode is enabled, the DHCP
client includes the text configured as the DHCP Vendor Class ID
String in DHCP requests.
The text string to add to DHCP requests as option 60, the VCI option.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.96 System > Firmware > Status
Description
The unit ID of the switch.
The code file version of the active image.
The code file version of the backup image.
The image version that is loaded and running on this unit.
The image version to be loaded after the system reboots.
The description associated with the active code file.
The description associated with the backup code file.
Click Refresh to update the screen.
98