Figure 4.328Qos > Diffserv > Policy Configuration > Add Class - Advantech EKI-9516P-HV User Manual

Item Description
Add Attribute Click Add Attribute to add attributes to a policy or to change the policy
attributes.
Remove Last Class Click Remove Last Class to remove the most recently associated
class from the selected policy.
To add a class to the policy:
Click QoS > Diffserv > Policy Configuration > Add Class.
Figure 4.328 QoS > Diffserv > Policy Configuration > Add Class
The following table describes the items in the previous figure.
Item Description
Policy The name of the policy. To add a class to the policy, remove a class
from the policy, or configure the policy attributes, you must first select
its name from the menu.
Type The traffic flow direction to which the policy is applied.
Class The DiffServ class or classes associated with the policy. The policy is
applied to a packet when a class match within that policy-class is
found.
Submit Click Submit to save the values.
Cancel Click Cancel to close the window.
To add attributes to a policy or to change the policy attributes:
Click QoS > Diffserv > Policy Configuration > Add Attribute.
Figure 4.329 QoS > Diffserv > Policy Configuration > Add Attribute
301 EKI-9500 Series User Manual