Figure 4.233Switching > Lldp-Med > Interface - Advantech EKI-9516P-HV User Manual

The following table describes the items in the previous figure.
Item
Fast Start Repeat
Count
Device Class
Submit
Refresh
Cancel
4.4.15.2 Interface
Use the LLDP-MED Interface Summary page to enable LLDP-MED mode on an
interface and to configure its properties.
To access this page, click Switching > LLDP-MED > Interface.
The following table describes the items in the previous figure.
Item
Interface
Link Status
MED Status / LLDP-
MED Mode
Notification Status /
Configuration Notifi-
cation Mode
Operational Status
Transmit TLVs
Refresh
EKI-9500 Series User Manual
Description
The number of LLDP-MED Protocol Data Units (PDUs) that will be
transmitted when the protocol is enabled.
The device's MED Classification. The following three classifications
represent the actual endpoints:

Class I Generic (for example, IP Communication Controller)

Class II Media (for example, Conference Bridge)

Class III Communication (for example, IP Telephone)
The fourth device is Network Connectivity Device, which is typically a
device such as a LAN switch or router, IEEE 802.1 bridge, or IEEE
802.11 wireless access point.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.233 Switching > LLDP-MED > Interface
Description
The interface associated with the rest of the data in the row. When
configuring LLDP-MED settings, this field identifies the interfaces that
are being configured.
The link status of the interface, which is either Up or Down. An inter-
face that is down does not forward traffic.
The administrative status of LLDP-MED on the interface. When LLDP-
MED is enabled, the transmit and receive function of LLDP is effec-
tively enabled on the interface.
Indicates whether LLDP-MED topology change notifications are
enabled or disabled on the interface.
Indicates whether the interface will transmit TLVs.
The LLDP-MED TLV(s) that the interface transmits:

Capabilities: 0

Network Policy: 1

Extended PSE: 3
Click Refresh to update the screen.
210