Figure 4.266Switching > Protocol Based Vlan Configuration - Advantech EKI-9516P-HV User Manual

The following table describes the items in the previous figure.
Item
Group Name
VLAN
Protocol
Interface
Submit
Cancel
4.4.23.2 Configuration
Use the Protocol Based VLAN Group Configuration page to configure existing Proto-
col-based VLAN (PBVLAN) groups. You can change the group name, VLAN ID, pro-
tocol information, and interfaces associated with the PBVLAN group.
To access this page, click Switching > Protocol Based VLAN > Configuration.
Figure 4.266 Switching > Protocol Based VLAN > Configuration
The following table describes the items in the previous figure.
Item
Group Name
Group Name
EKI-9500 Series User Manual
Description
The user-configured name that identifies the PBVLAN group.
The VLAN ID associated with the PBVLAN. VLAN tagging for the PBV-
LAN works as follows:

If the frame received over a port is tagged, normal processing
takes place.

If the frame received over a port is untagged, the frame type is
matched according to the protocol(s) assigned to the group on
that port.
–
If a match is found, the frame is assigned the VLAN ID speci-
fied for the group.
–
If a match is not found, the frame is assigned the port VID
(PVID) as its VLAN ID.
The protocol or protocols to use as the match criteria for an Ethernet
frame. The protocol is included in the two-byte EtherType field of the
frame. When adding a PBVLAN, you can specify the EtherType hex
value or (for IP, ARP, and IPX) the protocol keyword.
The interfaces that are members of the PBVLAN group. An interface
can be a member of multiple groups as long as the same protocol is
not specified in more than one group that includes the interface. When
adding a PBVLAN group, use the Available Interfaces and Group Inter-
faces fields to configure the interfaces that are members of the PBV-
LAN group. To move an interface between the Available Interfaces and
Group Interfaces fields, click the interface (or CTRL + click to select
multiple interfaces), and then click the appropriate arrow to move the
selected interfaces to the desired field.
Click Submit to save the values.
Click Cancel to close the window.
Description
Click the drop-down menu select the PBLAN to change the properties.
Enter the group name to update the name of the PBLAN group.
238