Table of Contents
Advertisement
To access this page, click Switching > MVR > Group.
The following table describes the items in the previous figure.
Item
Group
Status
Members
Refresh
Add
Edit
Remove
To add a new group:
Click Switching > MVR > Group > Add.
The following table describes the items in the previous figure.
Item
Group
Contiguous Group
Count
Submit
Cancel
4.4.13.3
Interface
Use the MVR Interface Status page to configure MVR settings on specific interfaces.
To configure the settings for one or more interfaces, select each entry to modify and
click Edit. The same MVR settings are applied to all selected interfaces.
EKI-9500 Series User Manual
Figure 4.222 Switching > MVR > Group
Description
The multicast group address.
The status of the group, which can be one of the following:
Active: Group has one or more MVR ports participating.
Inactive: Group has no MVR ports participating.
The list of interfaces which participate in the MVR group. In the com-
patible mode, all source ports are members of all groups by default.
Click Refresh to update the screen.
Click Add to add a new group.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Figure 4.223 Switching > MVR > Group > Add
Description
The multicast group address.
Specify the desired number of groups to be created starting with the
entered group address. The default contiguous group count is 1.
Click Submit to save the values.
Click Cancel to close the window.
202
Advertisement
Table of Contents
