Table of Contents
Advertisement
The following table describes the items in the previous figure.
Item
Description
From
The IP address to exclude. In a range of addresses, this value is the
lowest address to exclude.
To
The highest address to exclude in a range of addresses. If the
excluded address is not part of a range, this field shows the same
value as the From field. When adding a single IP address to exclude,
you can enter the same address specified in the From field or leave
the field with the default value.
Refresh
Click Refresh to update the screen.
Add
Click Add to add a new excluded address.
Remove
Click Remove to remove the selected entries.
To add a new excluded address:
Click System > Advanced Configuration > DHCP Server > Excluded Addresses
> Add.
Figure 4.12 System > Advanced Configuration > DHCP Server > Excluded
The following table describes the items in the previous figure.
Item
Description
From
The IP address to exclude. In a range of addresses, this value is the
lowest address to exclude.
To
The highest address to exclude in a range of addresses. If the
excluded address is not part of a range, this field shows the same
value as the From field. When adding a single IP address to exclude,
you can enter the same address specified in the From field or leave
the field with the default value.
Submit
Click Submit to save the values.
Cancel
Click Cancel to close the window.
Pool Summary
Use the DHCP Server Pool Summary page to view the currently configured DHCP
server pools and to add and remove pools. A DHCP server pool is a set of network
configuration information available to DHCP clients that request the information.
To access this page, click System > Advanced Configuration > DHCP Server >
Pool Summary.
Figure 4.13 System > Advanced Configuration > DHCP Server > Pool Summary
Addresses > Add
33
EKI-9500 Series User Manual
Advertisement
Table of Contents
