Table of Contents
Advertisement
To add a new policy list:
Click System > Advanced Configuration > Event Manager > Policy List > Add.
Figure 4.79 System > Advanced Configuration > Event Manager > Policy List >
The following table describes the items in the previous figure.
Item
List Name
Event Options
Submit
Cancel
Policy Selection
Use the Policy List Selection page to associate a policy list with each event alarm
method (Alarm LED, Alarm Relay, Alarm Relay 2, Alarm Email, Logging, and SNMP
Traps).
To access this page, click System > Advanced Configuration > Event Manager >
Policy Selection.
Figure 4.80 System > Advanced Configuration > Event Manager > Policy
EKI-9500 Series User Manual
Add
Description
The name of the policy list. This field can be configured only when
adding a new policy list.
The method(s) used to authenticate a user who attempts to access
the management interface or network. The possible methods are as
follows:
Link Change Members: The port(s) included in the link-change
event. If the event that meets the policy criteria that is in the Link
Change Members list, it is applied to Alarm LED, Alarm Relay,
Alarm Relay 2, Logging, or Trap. To add source ports to the pol-
icy, select one or more ports from the Available Port List field
(CTRL + click to select multiple ports). Then, use the appropriate
arrow icon to move the selected ports to the Link Change Mem-
bers field.
Click Submit to save the values.
Click Cancel to close the window.
Selection
86
Advertisement
Table of Contents
