Poller; Figure 4.42 System > Advanced Configuration > Sflow Receiver - Advantech EKI-9516P-HV User Manual

agent on the device. The sFlow agent can send packet sampling data to multiple
sFlow receivers on the network.
To access this page, click System > Advanced Configuration > sFlow > Receiver.
Figure 4.42 System > Advanced Configuration > sFlow > Receiver
The following table describes the items in the previous figure.
Item
Index
Owner String
Time Remaining
Maximum Datagram
Size
Address
Port
Datagram Version
Refresh
Edit
Clear

Poller

Use the sFlow Poller Configuration page to add, remove, or edit a counter poller
instance on a port (data source). Configuring a poller instance allows the sFlow agent
to perform periodic counter sampling on a specified port and efficiently export coun-
ters to an sFlow receiver.
To access this page, click System > Advanced Configuration > sFlow > Poller.
Figure 4.43 System > Advanced Configuration > sFlow > Poller
The following table describes the items in the previous figure.
Item
Poller Data Source
EKI-9500 Series User Manual
Description
The receiver for which data is displayed or configured.
The entity making use of this sFlow receiver table entry. If this field is
blank, the entry is currently unclaimed.
The time (in seconds) remaining before the sampler is released and
stops sampling. A value of 0 essentiality means the receiver is not
configured. When configuring the sFlow receiver settings, you must
select the Timeout Mode option before you can configure a Timeout
Value.
The maximum number of data bytes that can be sent in a single sam-
ple datagram. The receiver should also be set to this value to avoid
fragmentation of the sFlow datagrams.
The IP address of the sFlow receiver.
The destination UDP port for sFlow datagrams.
The version of sFlow datagrams that the sFlow agent should send to
the sFlow receiver.
Click Refresh to update the screen.
Click Edit to edit the selected entries.
Click Clear to clear the selected entry.
Description
The sFlowDataSource for this sFlow poller. The sFlow agent supports
physical ports as sFlow data sources.
56