Table of Contents
Advertisement
Item
Password Required
Password
Confirm
Encrypted
Submit
Cancel
4.3.15.3
Sessions
The Logged In Sessions page identifies the users that are logged in to the manage-
ment interface of the device. The page also provides information about their connec-
tions.
To access this page, click System > Users > Sessions.
The following table describes the items in the previous figure.
Item
ID
User Name
Connection From
Idle Time
Session Time
Session Type
Refresh
4.3.16
Utilities
4.3.16.1
System Reset
Use the System Reset page to reboot the system. If the platform supports stacking,
you can reset any of the switches in the stack, or all switches in the stack from this
page.
To access this page, click System > Utilities > System Reset.
Description
Select this option to indicate that the user must enter a password to
be authenticated. If this option is clear, the user is required only to
enter a valid user name.
Specify the password to associate with the user name (if required).
Re-enter the password to confirm the entry.
Select this option to encrypt the password before it is stored on the
device.
Click Submit to save the values.
Click Cancel to close the window.
Figure 4.146 System > Users > Sessions
Description
The unique ID of the session.
The name that identifies the user account.
Identifies the administrative system that is the source of the connec-
tion. For remote connections, this field shows the IP address of the
administrative system. For local connections through the console port,
this field shows the communication standard for the serial connection.
Shows the amount of time in hours, minutes, and seconds that the
logged-on user has been inactive.
Shows the amount of time in hours, minutes, and seconds since the
user logged onto the system.
Shows the type of session, which can be Telnet, Serial, SSH, HTTP,
or HTTPS.
Click Refresh to update the screen.
Figure 4.147 System > Utilities > System Reset
141
EKI-9500 Series User Manual
Advertisement
Table of Contents
