Table of Contents
Advertisement
To access this page, click System > Summary > Description.
The following table describes the items in the previous figure.
Item
System Description
System Name
System Location
System Contact
IP Address
Service Port IP
Address
System Object ID
System Up Time
Current SNTP Syn-
chronized Time
MIBs Supported
Submit
Refresh
Cancel
4.3.14.3
Inventory
The System Inventory Information page displays information about the system hard-
ware and software.
To access this page, click System > Summary > Inventory.
EKI-9500 Series User Manual
Figure 4.139 System > Summary > Description
Description
The product name of this device.
The name used to identify this device. The factory default is blank.
The location of this device. The factory default is blank.
The contact person for this device. The factory default is blank.
The IP address assigned to the network interface. The network inter-
face is the logical interface that allows remote management of the
device via any of the front-panel switch ports.
The IP address assigned to the service port. The service port provides
remote management access to the device. Traffic on this port is seg-
regated from operational network traffic on the switch ports and can-
not be switched or routed to the operational network.
The base object ID for the device's enterprise MIB. This ID is used for
SNMP-based management of the device.
The time in days, hours, minutes, and seconds since the last device
reboot.
Displays the currently synchronized SNTP time in UTC. If the time is
not synchronized with an SNTP server, it displays "Not Synchronized".
The list of MIBs supported by the SNMP agent running on this device.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Figure 4.140 System > Summary > Inventory
136
Advertisement
Table of Contents
