Advantech EKI-9516P-HV User Manual page 250

Item
Acceptable Frame
Type
Ingress Filtering
Untagged VLANs
Tagged VLANs
Forbidden VLANs
Dynamic VLANs
Priority
Refresh
Edit
Edit All
4.4.20.4 Switchport Summary
Use the VLAN Switchport Summary page to configure switchport mode settings on
interfaces. The switchport mode defines the purpose of the port based on the type of
device it connects to and constraints the VLAN configuration of the port accordingly.
Assigning the appropriate switchport mode helps simplify VLAN configuration and
minimize errors.
Description
Indicates how the interface handles untagged and priority tagged
frames. The options include the following:

Admit All: Untagged and priority tagged frames received on the
interface are accepted and assigned the value of the Port VLAN
ID for this interface.

Only Tagged: The interface discards any untagged or priority
tagged frames it receives.

Only Untagged: The interface discards any tagged frames it
receives.
For all options, VLAN tagged frames are forwarded in accordance with
the IEEE 802.1Q VLAN standard.
Indicates how the interface handles tagged frames. The options
include the following:

Enabled: A tagged frame is discarded if this interface is not a
member of the VLAN identified by the VLAN ID in the tag.

Disabled: All tagged frames are accepted.
VLANs which are configured on the port to transmit egress packets as
untagged.
VLANs which are configured on the port to transmit egress packets as
tagged.
When configuring port memberships in VLANs, you can specify one or
more VLANs to be excluded from the available VLANs for the port. The
forbidden VLANs list shows the VLANs to which the port cannot be
assigned membership.
The list of VLANs of which the port became a member as result of the
operations of dynamic VLAN protocols. When a VLAN is created as a
dynamic VLAN, any port that is configured as switchport type Trunk or
General automatically becomes a member of the VLAN, unless the
VLAN port is excluded from the VLAN.
The default 802.1p priority assigned to untagged packets arriving at
the interface.
Click Refresh to update the screen.
Click Edit to edit the selected interfaces.
Click Edit All to apply same settings to all interfaces.
231 EKI-9500 Series User Manual