Table of Contents
Advertisement
Item
Report Suppression
Mode
Submit
Cancel
4.4.8.4
Multicast Router Configuration
If a multicast router is attached to the switch, its existence can be learned dynami-
cally. You can also statically configure a switch port as a multicast router interface.
Use the IGMP Snooping Multicast Router Configuration page to manually configure
an interface as a static multicast router interface.
To access this page, click Switching > IGMP Snooping > Multicast Router Config-
uration.
Figure 4.197 Switching > IGMP Snooping > Multicast Router Configuration
The following table describes the items in the previous figure.
Item
Interface
Multicast Router
Refresh
Edit
4.4.8.5
Multicast Router VLAN Status
If a multicast router is attached to the switch, its existence can be learned dynami-
cally. You can also statically configure one or more VLANs on each interface to act as
a multicast router interface, which is an interface that faces a multicast router or
IGMP querier and receives multicast traffic.
Description
The IGMPv1 and IGMPv2 report suppression mode. The device uses
IGMP report suppression to limit the membership report traffic sent to
multicast-capable routers. When this mode is enabled, the device does
not send duplicate reports to the multicast router. Note that this mode
is supported only when the multicast query has IGMPv1 and IGMPv2
reports. This feature is not supported when the query includes IGMPv3
reports. The options are as follows:
Enabled: Only the first IGMP report from all hosts for a group
IGMP report is forwarded to the multicast routers.
Disabled: The device forwards all IGMP reports from all hosts in
a multicast group to the multicast routers.
Click Submit to save the values.
Click Cancel to close the window.
Description
The interface associated with the rest of the data in the row. When
configuring the IGMP snooping multicast router settings, this field iden-
tifies the interface(s) that are being configured.
Indicates whether the interface is enabled or disabled as a multicast
router interface.
Click Refresh to update the screen.
Click Edit to edit the selected entries.
183
EKI-9500 Series User Manual
Advertisement
Table of Contents
