Table of Contents
Advertisement
To access this page, click System > Advanced Configuration > sFlow > Sampler.
Figure 4.45 System > Advanced Configuration > sFlow > Sampler
The following table describes the items in the previous figure.
Item
Sampler Data Source The sFlowDataSource for this sFlow sampler. The sFlow agent sup-
Receiver Index
Sampling Rate
Maximum Header
Size
Refresh
Add
Edit
Remove
To add a new sampler data:
Click System > Advanced Configuration > sFlow > Sampler > Add.
Figure 4.46 System > Advanced Configuration > sFlow > Sampler > Add
The following table describes the items in the previous figure.
Item
Sampler Data Source The sFlowDataSource for this sFlow sampler. The sFlow agent sup-
Receiver Index
Sampling Rate
Maximum Header
Size
Submit
Cancel
EKI-9500 Series User Manual
Description
ports physical ports as sFlow data sources.
The sFlowReceiver for this sFlow sampler. The specified Receiver
Index must be associated with an active sFlow receiver. If a receiver
expires, all samplers associated with the receiver will also expire.
The statistical sampling rate for packet sampling from this source. A
sampling rate of 0 disables sampling.
The maximum number of bytes that should be copied from a sampled
packet.
Click Refresh to update the screen.
Click Add to add a new sampler data.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Description
ports physical ports as sFlow data sources.
The sFlowReceiver for this sFlow sampler. The specified Receiver
Index must be associated with an active sFlow receiver. If a receiver
expires, all samplers associated with the receiver will also expire.
The statistical sampling rate for packet sampling from this source. A
sampling rate of 0 disables sampling.
The maximum number of bytes that should be copied from a sampled
packet.
Click Submit to save the values.
Click Cancel to close the window.
58
Advertisement
Table of Contents
