Table of Contents
Advertisement
Item
Description
Password
If the Security is TLSv1, this field specifies the password associated
with the configured user name for mail server access. When adding or
editing the server, you must retype the password to confirm that it is
entered correctly.
Refresh
Click Refresh to update the screen.
Add
Click Add to add a new
Edit
Click Edit to edit the selected entries.
Remove
Click Remove to remove the selected entries.
To add a new Email server:
Click System > Advanced Configuration > Email Alerts > Server > Add.
Figure 4.29 System > Advanced Configuration > Email Alerts > Server > Add
The following table describes the items in the previous figure.
Item
Description
Security
Specifies the type of authentication to use with the mail server, which
can be TLSv1 (SMTP over SSL) or None (no authentication is
required).
Port
Specifies the TCP port that
server.
User Name
If the Security is TLSv1, this field specifies the user name required to
access the mail server.
Password
If the Security is TLSv1, this field specifies the password associated
with the configured user name for mail server access. When adding or
editing the server, you must retype the password to confirm that it is
entered correctly.
Submit
Click Submit to save the values.
Cancel
Click Cancel to close the window.
Statistics
Use the Email Alert Statistics page to view information about Email alerts sent from
the switch.
To access this page, click System > Advanced Configuration > Email Alerts > Sta-
tistics.
Figure 4.30 System > Advanced Configuration > Email Alerts > Statistics
The following table describes the items in the previous figure.
Item
Description
Number of Emails
The number of email alerts that were successfully sent since the
Sent
counters were cleared or the system was reset.
Email
server.
Email
alerts are sent to on the SMTP
47
EKI-9500 Series User Manual
Advertisement
Table of Contents
