Table of Contents
Advertisement
Item
Power Supply Volt-
age (dV)
Temperature Guard
Threshold (°C)
System Tempera-
ture (°C)
System Fault Indica-
tion
Submit
Refresh
Cancel
4.3.10.2
PoE Port Configuration and Status
Use the PoE Port Configuration and Status page to configure PoE settings on inter-
faces.
To access this page, click System > PoE > PoE Port Configuration and Status.
Figure 4.119 System > PoE > PoE Port Configuration and Status
The following table describes the items in the previous figure.
Item
Interface
Admin Mode
Priority
Power Pairs
Power Class
Power Budget
Power Consumption The interface port output power drawn by device.
Cumulative Power
Consumption
EKI-9500 Series User Manual
Description
The measured usage voltage of PSE in dV.
Configure PoE temperature guard threshold.
The measured temperature of PSE in degree Celsius.
The fault status of the PSE.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Description
The interface associated with the rest of the data in the row. When
configuring PoE settings, this field identifies the interface(s) being con-
figured.
Indicates whether PoE is administratively enabled or disabled on the
interface.
The priority of the port when allocating available power. Power is deliv-
ered to the higher priority ports when needed before providing it to the
lower priority ports. Possible values are Critical, High, and Low. For the
same priority, the low number interface port will allocate available
power first.
Configure PoE port power pairs.
The device class determines the power limit. The switch learns the
class of the device through the receipt of Link Layer Discovery Proto-
col (LLDP) messages.
Configure the interface port maximal power. If the remainder available
power less than this port power budget will not provide this port power.
The cumulative measured usage power of PSE port in kilo-watts/hour.
116
Advertisement
Table of Contents
