Table of Contents
Advertisement
Item
Number of Emails
Failed
Time Since Last
Email Sent
Refresh
Clear Counters
Subject
Use the Email Alert Subject Configuration page to configure the subject line of the
Email alert messages sent from the switch.
To access this page, click System > Advanced Configuration > Email Alerts >
Subject.
Figure 4.31 System > Advanced Configuration > Email Alerts > Subject
The following table describes the items in the previous figure.
Item
Message Type
Email Subject
Submit
Refresh
Delete
Cancel
Address
Use the Email Alert To Address Configuration page to configure the Email addresses
to which alert messages sent.
To access this page, click System > Advanced Configuration > Email Alerts >
Address.
Figure 4.32 System > Advanced Configuration > Email Alerts > Address
The following table describes the items in the previous figure.
Item
Message Type
To Address
Refresh
Add
Remove
EKI-9500 Series User Manual
Description
The number of email alerts that failed to be sent since the counters
were cleared or system was reset.
The amount of time in days, hours, minutes, and seconds that has
passed since the last email alert was successfully sent.
Click Refresh to update the screen.
Click Clear Counters to reset all counters to zero.
Description
Select the message type with the subject to edit.
Specify the text to be displayed in the subject of the email alert mes-
sage for the selected message type.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Delete to delete the selected message type.
Click Cancel to restore default value.
Description
Specifies whether to send urgent, non urgent, or both types of email
alert message to the associated address.
The valid email address of an email alert recipient.
Click Refresh to update the screen.
Click Add to add a new email alert to address.
Click Remove to remove the selected entries.
48
Advertisement
Table of Contents
