Figure 4.209Switching > Mld Snooping > Multicast Router Configuration - Advantech EKI-9516P-HV User Manual

Eki-9500 series
Table of Contents

Advertisement

Item
Fast Leave Admin
Mode
Submit
Cancel
4.4.10.5
Multicast Router Configuration
Use the MLD Snooping Multicast Router Configuration page to manually configure
an interface as a static MLD snooping multicast router interface. If a multicast router
is attached to the switch, its existence can be learned dynamically. You can also stat-
ically configure an interface as a multicast router interface, which is an interface that
faces a multicast router or MLD querier and receives multicast traffic.
To access this page, click Switching > MLD Snooping > Multicast Router Config-
uration.
Figure 4.209 Switching > MLD Snooping > Multicast Router Configuration
The following table describes the items in the previous figure.
Item
Interface
Multicast Router
Refresh
Edit
4.4.10.6
Multicast Router VLAN Status
Use the MLD Snooping Multicast Router VLAN Status page to enable or disable spe-
cific VLANs as static multicast router interfaces for a physical port or LAG and to view
the multicast router VLAN status for each interface. A multicast router interface faces
a multicast router or MLD querier and receives multicast traffic. If a multicast router is
attached to the switch, its existence can be learned dynamically. You can also stati-
cally configure one or more VLANs on each interface to act as multicast router inter-
faces.
EKI-9500 Series User Manual
Description
The administrative mode of Fast Leave on the VLAN. If Fast Leave is
enabled, the VLAN can be immediately removed from the Layer 2 for-
warding table entry upon receiving an MLD leave message for a multi-
cast group without first sending out MAC-based general queries.
Click Submit to save the values.
Click Cancel to close the window.
Description
The interface associated with the rest of the data in the row. When
configuring the MLD snooping multicast router settings, this field identi-
fies each interface that is being configured.
Indicates whether the interface is enabled or disabled as a multicast
router interface.
Click Refresh to update the screen.
Click Edit to edit the selected entries.
192

Advertisement

Table of Contents
loading

Table of Contents