Figure 4.117System > Passwords > Reset Passwords - Advantech EKI-9516P-HV User Manual

To access this page, click System > Passwords > Reset Passwords.
Figure 4.117 System > Passwords > Reset Passwords
The following table describes the items in the previous figure.
Item
Reset
4.3.10 PoE
4.3.10.1 PoE Configuration and Status
Use the PoE Configuration and Status page to view Power over Ethernet (PoE) sta-
tus information and configure global PoE settings.
To access this page, click System > PoE > PoE Configuration and Status.
Figure 4.118 System > PoE > PoE Configuration and Status
The following table describes the items in the previous figure.
Item
Administrative State Indicates whether PoE is administratively enabled or disabled.
Power Management
Mode
System Power Bud-
get (dWatts)
Legacy Detection
System Power Con-
sumption (dWatts)
System Power
Usage Alarm
Threshold (%)
System Cumulative
Power Consump-
tion (KWH)
System Current
Consumption
(mAmps)
Voltage Guard
Threshold (dV)
Description
Click Reset to initiates a reset of all login passwords to their factory
default setting after displaying a confirmation message.
Description
The default setting is Dynamic mode.

Static: according to port power budget.

Dynamic: according to actual (real time) power consumption.
Configure PoE maximal available power and the PoE chip will be reset
to make the new setting take effect.
Indicates whether PoE is legacy detection enabled or disabled.
The amount of power in dWatts currently being consumed by con-
nected PoE devices.
Configure PoE power usage alarm threshold. When the PoE power
being used exceeds this threshold, a trap is generated to the system
log to alert the system administrator of high power usage.
The cumulative measured usage power of PSE in kilo-watts/hour.
The measured usage current of PSE in milli-amperes.
Configure PoE voltage guard threshold.
115 EKI-9500 Series User Manual