Table of Contents
Advertisement
Item
Add
Edit
Remove
To add a new LLDP interface:
Click Switching > LLDP-MED > Interface > Add.
Figure 4.234 Switching > LLDP-MED > Interface > Add
The following table describes the items in the previous figure.
Item
Interface
MED Status / LLDP-
MED Mode
Notification Status /
Configuration Notifi-
cation Mode
Transmit TLVs
Submit
Cancel
4.4.15.3
Local Devices
The LLDP-MED Local Device Summary page displays information on LLPD-MED
information advertised on the selected local interface.
To access this page, click Switching > LLDP-MED > Local Devices.
Figure 4.235 Switching > LLDP-MED > Local Devices
Description
Click Add to add a new LLDP interface.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
Description
The interface associated with the rest of the data in the row. When
configuring LLDP-MED settings, this field identifies the interfaces that
are being configured.
The administrative status of LLDP-MED on the interface. When LLDP-
MED is enabled, the transmit and receive function of LLDP is effec-
tively enabled on the interface.
Indicates whether LLDP-MED topology change notifications are
enabled or disabled on the interface.
The LLDP-MED TLV(s) that the interface transmits:
Capabilities: 0
Network Policy: 1
Extended PSE: 3
Click Submit to save the values.
Click Cancel to close the window.
211
EKI-9500 Series User Manual
Advertisement
Table of Contents
