Figure 4.206Switching > Mld Snooping > Source Specific Multicast - Advantech EKI-9516P-HV User Manual

To access this page, click Switching > MLD Snooping > Source Specific Multi-
cast.
Figure 4.206 Switching > MLD Snooping > Source Specific Multicast
The following table describes the items in the previous figure.
Item
VLAN ID
Group
Interface
Reporter
Source Filter Mode
Source Address List The source IPv6 address or addresses for which source filtering is
Refresh
4.4.10.4 VLAN Status
Use the MLD Snooping VLAN Status page to enable or disable MLD snooping on
system VLANs and to view and configure per-VLAN MLD snooping settings. Only
VLANS that are enabled for MLD snooping appear in the table.
To access this page, click Switching > MLD Snooping > VLAN Status.
Figure 4.207 Switching > MLD Snooping > VLAN Status
The following table describes the items in the previous figure.
Item
VLAN ID
Admin Mode
EKI-9500 Series User Manual
Description
The VLAN on which the MLDv2 report is received.
The IPv6 multicast group address of the multicast group the host
belongs to.
The interface on which the MLD v2 report is received.
The IPv6 address of the host that sent the MLDv2 report.
The source filter mode for the specified group, which is one of the fol-
lowing:

Include: The receiver has expressed interest in receiving multi-
cast traffic for the multicast group from the source or sources in
the Source Address List.

Exclude: The receiver has expressed interest in receiving multi-
cast traffic for the multicast group from any source except the
source or sources in the Source Address List.
requested.
Click Refresh to update the screen.
Description
The VLAN associated with the rest of the data in the row. When
enabling MLD snooping on a VLAN, use this menu to select the
desired VLAN. Only VLANs that have been configured on the system
and are not already enabled for MLD snooping appear in the menu.
When modifying MLD snooping settings, this field identifies the VLAN
that is being configured.
The administrative mode of MLD snooping on the VLAN. MLD snoop-
ing must be enabled globally and on a VLAN for the VLAN to be able to
snoop MLD packets and determine which network segments should
receive multicast packets directed to the group address.
190