Table of Contents
Advertisement
To access this page, click Switching > VLAN > Status.
Note!
You cannot remove or rename VLAN 1.
The following table describes the items in the previous figure.
Item
VLAN ID
Name
Type
RSPAN
Unknown Multicast
Refresh
Add
Edit
Remove
EKI-9500 Series User Manual
Figure 4.252 Switching > VLAN > Status
Description
The unique VLAN identifier (VID).
A user-configurable name that identifies the VLAN.
The type of VLAN, which can be one of the following:
Default: The default VLAN. This VLAN is always present, and the
VLAN ID is 1.
Static: A user-configured VLAN.
Dynamic: A VLAN created by GARP VLAN Registration Protocol
(GVRP).
Identifies whether the VLAN is configured (Enabled) as the Remote
Switched Port Analyzer (RSPAN) VLAN. The RSPAN VLAN is used to
carry mirrored traffic from source ports to a destination probe port on a
remote device.
Use this field to specify whether all the ports will forward unknown mul-
ticast frames in this VLAN. The factory default is "Mroute". The possi-
ble values are:
Flooding: flood all unknown multicast frames to all the ports in
this VLAN, except for the receiving port.
Discarding: discard all unknown multicast frames received from
all the ports in this VLAN.
Mroute: flood the unknown multicast frames to multicast router
ports in this VLAN.
Click Refresh to update the screen.
Click Add to add a new VLAN.
Click Edit to edit the selected entries.
Click Remove to remove the selected entries.
228
Advertisement
Table of Contents
