Figure 4.255Switching > Vlan > Port Summary - Advantech EKI-9516P-HV User Manual

Item
Participation
Tagging
Refresh
Edit
Edit All
4.4.20.3 Port Summary
Use the VLAN Port Summary page to configure the way interfaces handle VLAN-
tagged, priority-tagged, and untagged traffic.
To access this page, click Switching > VLAN > Port Summary.
The following table describes the items in the previous figure.
Item
Interface
Port VLAN ID
EKI-9500 Series User Manual
Description
The participation mode of the interface in the selected VLAN, which is
one of the following:

Include: The port is always a member of the selected VLAN. This
mode is equivalent to registration fixed in the IEEE 802.1Q stan-
dard.

Exclude: The port is never a member of the selected VLAN. This
mode is equivalent to registration forbidden in the IEEE 802.1Q
standard.

Auto Detect: The port can be dynamically registered in the
selected VLAN through GVRP or MVRP. The port will not partici-
pate in this VLAN unless it receives a GVRP or MVRP request
and the device software supports the corresponding protocol.
This mode is equivalent to registration normal in the IEEE
802.1Q standard.
The tagging behavior for all the ports in this VLAN, which is one of the
following:

Tagged: The frames transmitted in this VLAN will include a VLAN
ID tag in the Ethernet header.

Untagged: The frames transmitted in this VLAN will be untagged.
Click Refresh to update the screen.
Click Edit to edit the selected interfaces.
Click Edit All to apply same settings to all interfaces.
Figure 4.255 Switching > VLAN > Port Summary
Description
The interface associated with the rest of the data in the row. When
editing information for one or more interfaces, this field identifies the
interfaces that are being configured.
The VLAN ID assigned to untagged or priority tagged frames received
on this port. This value is also known as the Port VLAN ID (PVID). In a
tagged frame, the VLAN is identified by the VLAN ID in the tag.
230