Table of Contents
Advertisement
Item
Burst Interval
Refresh
Edit
4.4.5.4
ACL
Use the Dynamic ARP Inspection ACL Configuration page to configure ARP Access
Control Lists (ACLs). An ARP ACL can contain one or more permit rules. Each rule
contains the IP address and MAC address of a system allowed to send ARP packets.
When an ARP ACL is associated with a DAI-enabled VLAN, and an ARP packet is
received on an interface that is a member of that VLAN, DAI validates the address
information in the ARP packet against the rules in the ACL. If the sender information
in the ARP packet matches a rule in the ARP ACL, DAI considers the packet to be
valid, and the packet is forwarded.
To access this page, click Switching > Dynamic ARP Inspection > ACL.
Figure 4.185 Switching > Dynamic ARP Inspection > ACL
The following table describes the items in the previous figure.
Item
ACL Name
Sender IP Address
Sender MAC
Address
Refresh
Add ACL
Add Rule
Remove
To add a new ARP ACL:
Click Switching > Dynamic ARP Inspection > ACL > Add ACL.
Figure 4.186 Switching > Dynamic ARP Inspection > ACL > Add ACL
Description
The number of consecutive seconds the interface is monitored for
incoming ARP packet rate limit violations.
Click Refresh to update the screen.
Click Edit to edit the selected entries.
Description
The name of the ACL. Only the ACLs that appear in this column can be
referenced by DNI-enabled VLANs. When adding a rule to an existing
ACL, use the ACL Name menu to select the ACL to update.
The IP address of a system that is permitted to send ARP packets. The
ARP packet must match on both the Sender IP Address and Sender
MAC Address values in the rule to be considered valid.
The MAC address of a system that is permitted to send ARP packets.
The ARP packet must match on both the Sender IP Address and
Sender MAC Address values in the rule to be considered valid.
Click Refresh to update the screen.
Click Add ACL to add a new ARP ACL.
Click Add Rule to add a new rule to an existing ACL.
Click Remove to remove the selected entries.
173
EKI-9500 Series User Manual
Advertisement
Table of Contents
