Figure 4.242Switching > Port Security > Static Mac > Add - Advantech EKI-9516P-HV User Manual

Item
Sticky Mode
Refresh
Add
Remove
To associate a static MAC address with an interface:
Click Switching > Port Security > Static MAC > Add.
Figure 4.242 Switching > Port Security > Static MAC > Add
The following table describes the items in the previous figure.
Item
Interface
Static MAC Address The MAC address of the host that is allowed to forward packets on the
VLAN ID
Sticky Mode
Submit
Cancel
4.4.17.4 Dynamic MAC
Use the Port Security Dynamic MAC Addresses page to add and remove the MAC
addresses of hosts that are allowed to send traffic to specific interfaces on the
device. The number of MAC addresses you can associate with each interface is
determined by the maximum static MAC addresses allowed on a given interface.
EKI-9500 Series User Manual
Description
Indicates whether the static MAC address entry is added in sticky
mode. When adding a static MAC address entry, the Sticky Mode field
can be selected only if it is enabled on the interface. If a static MAC
address is added in sticky mode, and sticky mode is disabled on the
interface, the MAC address entry is converted to a dynamic entry and
will age out and be removed from the running (and saved) configura-
tion if it is not relearned.
Click Refresh to update the screen.
Click Add to associate a static MAC address with an interface.
Click Remove to remove the selected entries.
Description
The interface associated with the rest of the data in the row. When
adding a static MAC address entry, use the Interface menu to select
the interface to associate with the permitted MAC address.
associated interface.
The ID of the VLAN that includes the host with the specified MAC
address.
Indicates whether the static MAC address entry is added in sticky
mode. When adding a static MAC address entry, the Sticky Mode field
can be selected only if it is enabled on the interface. If a static MAC
address is added in sticky mode, and sticky mode is disabled on the
interface, the MAC address entry is converted to a dynamic entry and
will age out and be removed from the running (and saved) configura-
tion if it is not relearned.
Click Submit to save the values.
Click Cancel to close the window.
218