Table of Contents
Advertisement
Click System > Statistics > Time Based > Flow Based > Add.
Figure 4.133 System > Statistics > Time Based > Flow Based > Add
The following table describes the items in the previous figure.
Item
Description
Rule Id
The number that identifies the flow-based statistics collection rule.
Time Range
The name of the periodic or absolute time range to use for data collec-
tion. The time range is configured by using the Time Range Summary
and Time Range Entry Summary pages. The time range must be con-
figured on the system before the time-based statistics can be col-
lected.
Interface
The interface or interfaces on which the flow-based rule is applied.
Only traffic on the specified interfaces is checked against the rule.
Match Criteria
Match All
Select this option to indicate that all traffic matches the rule and is
counted in the statistics. This option is exclusive to all other match cri-
teria, so if Match All is selected, no other match criteria can be config-
ured.
Source IP
The source IP address to match in the IPv4 packet header.
Destination IP
The destination IP address to match in the IPv4 packet header.
Source MAC
The source MAC address to match in the ingress frame header.
Destination MAC
The destination MAC address to match in the ingress frame header.
Source TCP Port
The TCP source port to match in the TCP header.
Destination TCP Port The TCP destination port to match in the TCP header.
Source UDP Port
The UDP source port to match in the UDP header.
Destination UDP Port The UDP destination port to match in the UDP header.
Submit
Click Submit to save the values.
Cancel
Click Cancel to close the window.
131
EKI-9500 Series User Manual
Advertisement
Table of Contents
