Advantech EKI-9516P-HV User Manual page 322

Item Description
Police Single Rate Select this option to enable the single-rate traffic policing style for the
policy-class. The single-rate form of the police attribute uses a single
data rate and two burst sizes, resulting in three outcomes (conform,
exceed, and violate). After you select this option, configure the follow-
ing policing criteria:









Color Mode: The type of color policing used in DiffServ traffic
conditioning.
Color Conform Class: For color-aware policing, packets are
metered against the committed information rate (CIR) and the
peak information rate (PIR). The class definition used for policing
color awareness is only allowed to contain a single, non-
excluded class match condition identifying one of the supported
comparison fields: CoS, IP DSCP, IP Precedence, or Secondary
COS. This field is available only if one or more classes that
meets the color-awareness criteria exist.
Color Exceed Class: For color-aware policing, packets are
metered against the PIR only.
Committed Rate (Kbps): The maximum allowed arrival rate of
incoming packets for this class.
Committed Burst Size (Kbytes): The amount of conforming traffic
allowed in a burst.
Excess Burst Size (Kbytes): The amount of conforming traffic
allowed to accumulate beyond the Committed Burst Size
(Kbytes) value during longer-than-normal idle times. This value
allows for occasional bursting.
Conform Action: The action taken on packets that are considered
conforming (below the police rate).
Exceed Action: The action taken on packets that are considered
to exceed the committed burst size but are within the excessive
burst size.
Violate Action: The action taken on packets that are considered
non-conforming (above the police rate).
303 EKI-9500 Series User Manual