Advantech EKI-9516P-HV User Manual page 46

Item Description
Access Type The way the user accesses the system. This field can be configured
only when adding a new authentication list, and only the Login and
Enable access types can be selected. The access types are as fol-
lows:




Method Options The method(s) used to authenticate a user who attempts to access
the management interface or network. The possible methods are as
follows:








List Type The type of list, which is one of the following:


Access Line The access method(s) that use the list for authentication. The settings
for this field are configured on the Authentication Selection page.
Refresh Click Refresh to update the screen.
Add Click Add to add a new authentication list. See the following proce-
dure.
Edit Click Edit to edit the selected entries.
Login: User EXEC-level management access to the command-
line interface (CLI) by using a console connection or a telnet or
SSH session. Access at this level has a limited number of CLI
commands available to view or configure the system.
Enable: Privileged EXEC-level management access to the CLI
by using a console connection or a telnet or SSH session. In
Privileged EXEC mode, read-write users have access to all CLI
commands.
HTTP: Management-level access to the web-based user inter-
face by using HTTP.
Dot1x: Port-based access to the network through a switch port
that is controlled by IEEE 802.1X.
IAS: Uses the local Internal Authentication Server (IAS) data-
base for 802.1X port-based authentication.
Deny: Denies authentication.
Enable: Uses the locally configured Enable password to verify
the user's credentials.
Line: Uses the locally configured Line password to verify the
user's credentials.
Local: Uses the ID and password in the Local User database to
verify the user's credentials.
Radius: Sends the user's ID and password to the configured
Radius server to verify the user's credentials.
TACACS: Sends the user's ID and password to the configured
TACACS server to verify the user's credentials.
None: No authentication is used.
Default: The list is preconfigured on the system. This type of list
cannot be deleted, and only the Method Options are configu-
rable.
Configured: The list has been added by a user.
27 EKI-9500 Series User Manual