Table of Contents
Advertisement
To access this page, click System > Advanced Configuration > SNTP > Source
Interface Configuration.
Figure 4.67 System > Advanced Configuration > SNTP > Source Interface
The following table describes the items in the previous figure.
Item
Type
Interface
VLAN ID
Submit
Refresh
Cancel
4.3.2.10
Time Ranges
You can use these pages to configure time ranges to use in time-based access con-
trol list (ACL) rules. Time- based ACLs allow one or more rules within an ACL to be
based on a periodic or absolute time. Each ACL rule within an ACL except for the
implicit deny all rule can be configured to be active and operational only during a spe-
cific time period. The time range pages allow you to define specific times of the day
and week in order to implement time-based ACLs. The time range is identified by a
name and can then be referenced by an ACL rule defined with in an ACL.
Configuration
Use the Time Range Summary page to create a named time range. Each time range
can consist of one absolute time entry and/or one or more periodic time entries.
To access this page, click System > Advanced Configuration > Time Ranges >
Configuration.
Figure 4.68 System > Advanced Configuration > Time Ranges > Configuration
EKI-9500 Series User Manual
Configuration
Description
The type of interface to use as the source interface:
None: The primary IP address of the originating (outbound)
interface is used as the source address.
Interface: The primary IP address of a physical port is used as
the source address.
VLAN: The primary IP address of a VLAN routing interface is
used as the source address.
When the selected Type is Interface, select the physical port to use as
the source interface.
When the selected Type is VLAN, select the VLAN to use as the
source interface. The menu contains only the VLAN IDs for VLAN
routing interfaces.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
76
Advertisement
Table of Contents
