Advanced Configuration; Server > Global; Server > Excluded Addresses - Advantech EKI-9516P-HV User Manual

4.3.2

Advanced Configuration

4.3.2.1 DHCP Server
Global
Use the DHCP Server Global Configuration page to configure DHCP global parame-
ters.
To access this page, click System > Advanced Configuration > DHCP Server >
Global.
Figure 4.10 System > Advanced Configuration > DHCP Server > Global
The following table describes the items in the previous figure.
Item
Admin Mode
Conflict Logging
Mode
Bootp Automatic
Mode
Ping Packet Count
Submit
Refresh
Cancel
Excluded Addresses
Use the DHCP Server Excluded Addresses page to view and configure the IP
addresses the DHCP server should not assign to clients.
To access this page, click System > Advanced Configuration > DHCP Server >
Excluded Addresses.
Figure 4.11 System > Advanced Configuration > DHCP Server > Excluded
EKI-9500 Series User Manual
Description
Enables or disables the DHCP server administrative mode. When
enabled, the device can be configured to automatically allocate TCP/
IP configurations for clients.
Enables or disables the logging mode for IP address conflicts. When
enabled, the system stores information IP address conflicts that are
detected by the DHCP server.
Enables or disables the BOOTP automatic mode. When enabled, the
DHCP server supports the allocation of automatic addresses for
BOOTP clients. When disabled the DHCP server supports only static
addresses for BOOTP clients.
The number of packets the server sends to a pool address to check
for duplication as part of a ping operation. If the server receives a
response to the ping, the address is considered to be in conflict and is
removed from the pool.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
Addresses
32