Advantech EKI-9516P-HV User Manual page 100

The following table describes the items in the previous figure.
Item Description
Current Time
Time The current time on the system clock. This time is used to provide
time stamps on log messages. Additionally, some CLI show com-
mands include the time in the command output.
Zone The acronym that represents the time zone.
Date The current date on the system.
Time Source The time source from which the time update is taken:


Time Zone
Zone The acronym that represents the time zone.
Offset The number of hours offset from Coordinated Universal Time (UTC),
which is also known as Greenwich Mean Time (GMT).
Summer Time
Summer Time The summer time mode on the system:





Zone The acronym that represents the time zone of the summer time.
Offset The number of hours offset from Coordinated Universal Time (UTC),
which is also known as Greenwich Mean Time (GMT).
Status Indicates if summer time is currently active.
Refresh Click Refresh to update the screen.
Time Zone
Use the Time Zone Configuration page to manually configure the system clock set-
tings. The SNTP client must be disabled to allow manual configuration of the system
time and date.
SNTP: The time has been acquired from an SNTP server.
No Time Source: The time has either been manually configured
or not configured at all.
Disable: Summer time is not active, and the time does not shift
based on the time of year.
Recurring: Summer time occurs at the same time every year.
The start and end times and dates for the time shift must be
manually configured.
EU: The system clock uses the standard recurring summer time
settings used in countries in the European Union. When this
field is selected, the rest of the applicable fields on the page
except Offset and Zone are automatically populated and cannot
be edited.
USA: The system clock uses the standard recurring daylight
saving time settings used in the United States. When this field is
selected, the rest of the applicable fields on the page except Off-
set and Zone are automatically populated and cannot be edited.
Non-Recurring: Summer time settings are in effect only between
the start date and end date of the specified year. When this
mode is selected, the summer time settings do not repeat on an
annual basis.
81 EKI-9500 Series User Manual